Halo Lights 90mm Single Amber LED DD2026S - Diode Dynamics 2018 Hyundai Elantra

Diode DynamicsSKU: DD2026S
filler

Price:
Sale price$65,625.00

Shipping calculated at checkout

Description

7 Reasons to Buy the DD2026S Halo Lights for Your 2018 Hyundai Elantra


Upgrade the stock headlights of your Hyundai Elantra with the head-turning DD2026S.


Want to enhance the looks of your 2018 Hyundai Elantra to match the power of its engine? Whether you like to show off on your daily commute or with your fellow car enthusiasts, the DD2026S halo light is one of the most accessible and most affordable ways to take your car's lighting to the next level. For only $52.50, you can give your car a sporty look that matches what's under the hood. In this product description, we'll cover everything you need to know about this aftermarket part, including:


- What are halo lights?

- What are the seven reasons to upgrade?
- Why should you purchase the DD2026S by Diode Dynamics?
- What to consider when buying?


What are halo lights?

As a cosmetic upgrade, you can change the appearance by adding a ring of light around the existing lights of your car. While primarily for visual effect, high-quality headlight halo kits can also help make your car more noticeable in bright or low-light conditions. A halo kit is a ring-shaped circuit board with LED lights on the exterior surface and an adhesive layer on the interior. Some of the more advanced models, like the DD2026S even allow you to change the colors of the performance lighting technology via Bluetooth or a dedicated controller.


What are the seven reasons to upgrade?


Better vehicle appearance: As performance lighting technology halo lights, the DD2026S are vital for lucid vision in dark or foggy conditions. However, they serve other uses, such as levelling up the lighting appearance of your car. The singled amber LED halo lights are fascinating and give your car lighting a more spectacular look. An application is their fashionable white, low-power, 50 percent brightness bulb. A practical illustration will be how their white, low-power, 50 percent brightness halo lights make vehicles more appealing.


Increased reliability: Newer halo light models like the DD2026S are fitted with an LED driver that corrects the input voltage and protects the LEDs from current and voltage fluctuations. Older halo lights used resistors on the opposite side of the circuit board. If one resistor blew, the entire light array would go out. The new model also supports a wider voltage range.


Enhanced visibility: The essence of driving conditions comes first, and that's what these white, high-power, 100 percent brightness DD2026S halo lights do for your car. The LEDs lights have amber color and signal, double brightness, flashing (dims if powered more than two seconds) support that boosts your visibility to others. Rather than scatter around, they shine centrally, helping others see you.


Easy installation: Diode Dynamics has made some improvements to make installing the DD2026S as easy as possible. They removed the resistors on the back of the halo to make it easier to stick to the headlight securely. You can also effortlessly replace your halo light by simply plugging the old one out and plugging in the new one thanks to the external cable. It's a quick DIY installation that shouldn't take more than an hour without any fancy equipment.


Customization and control: There are a variety of halo light models from Diode Dynamics. You can opt for a fixed color bulb or one with customizable RBG palettes using a remote light controller. By using the LED technology, you will have greater control over the looks of your 2018 Hyundai Elantra to suit any occasion.


Affordable Upgrade: Assuming you have basic tools at home, upgrading your lights with the DD2026S can cost as little as the $52.50 base price. For this, you get four light halos, one for each of your individual lights, and a Bluetooth controller. It's one of the most affordable lighting alterations you can get to have the most noticeable effect on your 2018 Hyundai Elantra.


Energy-saving: The great energy-saving feature of the DD2026S halo lights is an extra reason to purchase one of their singled LEDs. The operating voltage of the Diode Dynamics DD2026S bulb is 9-16V, which reflects brightly considering the low power it utilizes. The lighting car bulbs run on white, low-power, 50 percent brightness levels, or white, high-power, 100 percent brightness as the case might be.


Why should you purchase the DD2026S by Diode Dynamics?



  • The DD2026S halo LEDs operate at 9-16V minimal values that preserve battery level.

  • The 2018 Hyundai Elantra Halo Lights DD2026S is manufactured by Diode Dynamics. The company is a pioneer in the automotive lighting industry and has a record for constantly innovating and improving its products.

  • Diode Dynamics has been in the business since 2006 and is a proudly American company founded in St. Louis, Missouri. Diode Dynamics, 4200 Shoreline Drive, Earth City, Missouri 63045 USA is the registered business address and headquarters of Diode Dynamics.

  • Since its establishment in 2006, Diode Dynamics, based in St. Louis, Missouri is a new group that assures you of the latest technology with a fair warranty.

  • Diode Dynamics provides plenty of information and support to its customers. You can reach them via email at contact@diodedynamics.com or from their contact page. You can also contact us for any fitment or other advice.

  • You get all of the benefits mentioned above for only $52.50.

  • Diode Dynamics provides plenty of supporting information. You can access Installation Instructions and other tutorials from the support center.

  • The DD2026S is backed by Diode Dynamics' warranty.

Specifications and Features

Red: White High Power, 100 percent brightness

Yellow: Signal, double brightness, flashing (dims if powered more than two seconds)

Black: Ground

Quantity: One (1)

Operating voltage: 9-16V

Operating temperature: -40C to 85C (-40F to 185F)

Connector(s): JST

Driver dimensions: 2.5 x 1.38 x 0.88 inch

Color: amber

Material: led

Measurement: 90mm

Count: single

White: White Low Power, 50 Percent Brightness

Submodel:

Vehicle Compatibility

2018 Hyundai Elantra

Payment & Security

American Express Apple Pay Diners Club Discover Google Pay Mastercard PayPal Shop Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Estimate shipping

You may also like

Recently viewed