FIC 650cc Injector Set (High-Z) - Genesis 2.0T

FIC 650cc Injector Set (High-Z) - Genesis 2.0T


Regular price
Sale price
Regular price
Sold out
Unit price
Shipping calculated at checkout.

Hyundai Genesis 2.0T Fuel Injector Clinic Injector Set: 4x650cc
Modified Saturated / High Impedance Ball & Seat Injectors. These
injectors utilize the latest technology and provide great linearity and
short pulse width repeatability. Includes pigtails PGT USC4 or add Plug
& Play adaptors PADPUtoD4

Fuel Injector Clinic injector sets
are precisely flow matched to within 1%. Each injector within each set
is individually numbered and results for each injector are listed on a
detailed flow sheet included with the set. Dynamic flow matching is used
only on injector sets where the additional time and cost are justified
by the corresponding benefits gained during the tuning process.

Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar)
at 90ºF fuel temperature using CF-16B calibration fluid.

The superior spray pattern and atomization make these injectors easy to tune and provide great drivability.

Injector Clinic injectors are set up to and include all o-rings needed
to fit the factory application for the listed vehicle. For aftermarket
or other unusual setups please contact us prior to placing your order to
make sure you receive injectors that fit properly.

Every injector is covered against failure caused by defects in original manufacture by our 12 month warranty.

Fuel Injector Clinic injectors use the factory electrical connector or
include solder-in pigtails. You can purchase adaptor ‘plug-n-play’
harnesses to avoid cutting your stock harness as an optional extra.

injector set contains high impedance injectors matched to the saturated
injector signal generated by this vehicle’s OEM ECU, OR is suitable for
use with an aftermarket ECU made or set up for high impedance

This set of injectors requires you to change the
injector plug on the wiring harness in your car. This can be done by
soldering in the pigtails (included with purchase) to replace the plugs
currently on your harness, or you can choose to purchase the optional
plug-n-play adaptors which will convert from the type of plugs on these
injectors to the plugs on your harness without any need for cutting or

This plug conversion is made necessary because FIC
always chooses to provide brand new, unused injectors for its
performance applications. Since consistent fuel delivery is critical to
high performance engine reliability we feel that using factory new
injectors eliminates the increased potential for failure that exists
when using remanufactured injectors.
We do not believe that increasing the chanc