3 Reasons to Upgrade to 2010-12 Hyundai Genesis Coupe Coilovers HY1 63X CP by Cusco
Your 2010-12 Hyundai Genesis Coupe 4Cyl 2.0L can sit even lower with the right batch of coilovers. Get the coilovers HY1 63X CP because it can lower your car’s ride height by several levels. Cusco is an authority in the production of high-performance suspension system upgrades, so you cannot go wrong with this kit. Price-wise, this kit is $3916, which is a small price for the degree of adjustability you will get. In this article, we’ll explore the features and benefits of this kit, but first, let us consider the following:
1. What are coilovers?
2. What are three reasons to upgrade?
3. Why buy the coilovers HY1 63X CP by Cusco
What is a Coilovers?
A coilovers is a pricier alternative to lowering springs or performance shocks. Coilovers are different from your car’s stock coil springs and shock absorbers in the fact that they integrate both coil springs and shocks into a single unit. A coilovers often consists of four coilovers (for the four corners of the car).
What are Three Reasons to Upgrade?
When fitted with the coilovers HY1 63X CP, your car, which weighs 3362 lbs (1525 kg) on its own, will cut corners with more precision and poise. These coilovers are superior to your stock springs and shocks in build quality, material composition, and strength. Their springs also have higher spring rates, while their shocks use shock valving technology. Thanks to the above, these coilovers will deliver improved handling and performance.
These coilovers provide up to 36 levels of ride height adjustment, so it makes it possible for you to configure your 2010-12 Hyundai Genesis Coupe 4Cyl 2.0L for different driving purposes without adding other parts. For example, you can set a moderate setting for daily driver duty and a much lower setting when you show off the car at a local car show. These coilovers also offer adjustable damping, so they also enable you to control how the vehicle handles.
As it is, your car achieves impressive balance and control because it has a front-position engine and rear wheel drive – a body layout that achieves near 50/50 front to rear weight distribution. Well, that balance can get even better. Its four coilovers will hold up the four corners of your 2010-12 Hyundai Genesis Coupe 4Cyl 2.0L at identical heights and angles so that they will achieve 1 to 1 weight displacement between opposite corners of the car. Henceforth will result in a decreased rate of suspension system wear and tear and improved control under heavy driving.
Why buy the coilovers HY1 63X CP by Cusco?
- Owing to this kit’s 12-month limited warranty, you will enjoy care-free usage, knowing that you will be able to get it replaced if it malfunctions.
- Cusco have close to two decades of experience designing and manufacturing suspension system parts and other automotive products for the aftermarket. It was founded in 1977 and has instituted its main production facility at 16635 Gemini Lane, Huntington Beach, CA 92647.
- This kit is manufactured in 16635 Gemini Lane, Huntington Beach, CA 92647. So, it has been produced per the high manufacturing and product-development standards that govern the US automotive aftermarket industry.
- You will only pay $3916 for it, which is less than what people tend to spend when modding their cars for superior handling.
Designed for competition models, the Cusco Zero-3x coil-over suspension kit is designed for full ride height and full suspension stroke length adjustment. With light weight Monotube 24-step (rebound), 24-step (bump - low speed), & 24-step (bump - high speed) damping force dampers for competition by using separated large capacity tanks.
Comes with camber adjustable plates, pillow-ball type upper mounts and rubber upper seats. The Mono-tube shock absorbers have a single cylinder which divides into a fluid area and a gas chamber. Unlike the twin-tube shock, fluid and gas is completely separated by floating piston to prevent foaming oil.
The diameter of outer shell directly influences the piston valve size. It has an advantage over bigger piston valves, makes stronger outer shell, and makes more heat radiation than twin-tube design. The high pressure gas and the floating piston makes steady damping force, it also provides additional damping force by pushing further into the gas chamber when in aggressive movement.
Specifications and Features
Relevant part numbers
Alternate Part Number(s): HY1 63X CP
2010 to 2012 Hyundai Genesis Coupe
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.